LaserSoft Imaging IT-8 Target Transparency 35mm Kodachrome
SOLD OUT
With this special target it is possible to calibrate your scanner for Kodachrome films by means of the SilverFast software. SilverFast can generate and manage multiple IT-8 profiles. Thus you can generate and save for example a profile for Kodak films and one for Kodachrome films. With a simple dialogue box you can choose the profile to be used.
We recommend to clean the target before calibration with pressurised air or with an anti static brush.
LaserSoft Imaging stands for very high quality IT-8 targets of their own production. The Kodachrome IT-8 target is available as a mounted 35mm slide (mount size 5x5 cm). It can be used for colour calibration of film scanners, medium format scanners and flat bed scanners with transparency unit.
You can find detailed information about IT-8 colour calibration and colour management on our SilverFast website and colour management website.
The target is delivered in a sealed bag. If the seal is broken a return is not possible.
The target is delivered in a sealed bag. If the seal is broken a return is not possible.
Benefits of LaserSoft Imaging IT-8 targets
- Higher precision than other manufacturers because smaller units are produced and calibrated
- Significant higher dynamic range
- A barcode on the target enables automatic detection of the according reference file (LaserSoft Imaging patent)
Scope of delivery
- LaserSoft Imaging Kodachrome IT-8 calibration slide 35mm
On this page we introduce recommended accessories for IT-8 targets:
Before carrying out an IT-8 calibration with an IT-8 target the target should be cleaned in order to avoid wrong measurements. The easiest way is simply brushing the film holder with an anti static brush, which not only removes the dust but also removes electric charges. Discharging is important because electric charge adducts dust as is generally known. Kinetronics anti static brushes are available in different sizes.
|
When working with film strips it often happens that you accidentally touch the emulsion side of the film. The damage often is irreparable. You can avoid damages to the film material and comfortably insert film strips into the scanner or film holder by wearing fine cotton gloves.
|
Anti-dust spray is used to clean film material - no matter if it's mounted slides or film strips - by removing dust and fluffs with a flimsy current of air without touching the film material at all. There is no better, more comfortable and more efficient way to clean your film material. Additionally anti dust spray is suitable to clean the scanner from dust thus avoiding disturbancies in the scans.
|
For working with single negatives or positives or film strips we highly recommend using tweezers with flat shovels, because otherwise you run the risk of touching and damaging the film. Additionally, with such tweezers you easily take out film strips from archive sheets or photo bags.
|
LaserSoft Imaging AG
Luisenweg 6-8
24105 Kiel
Tel.: (0431) 56009-0
e-mail: info@silverfast.com
Luisenweg 6-8
24105 Kiel
Tel.: (0431) 56009-0
e-mail: info@silverfast.com
.jpg "Preview: Kinetronics anti static brush SW-020")
