Dörr light panel LT-2020 LED 16x16cm dimmable
Ultra-slim LED light panel for viewing slides and negatives, for drawing and snapping. It can also be used as background lighting.
You can find further information and a shopping guide for light panels on our website about light panels.
Specifications
- Ultra-slim 8mm high!
- Durable, safe and energy saving LEDs
- High quality acrylic panels
- Continuously dimmable
- Color rendering index Ra (CRI):> 90
- Color temperature: 5600K
- Luminous surface: 165x165 mm
- Number of LEDs: 36
- Luminous flux approx. 792 lm (2.9 lm / cm²)
- Rated power: 7.2W
- Outside dimensions: 200 x 200 x 8 mm
- Weight: 315 g
- Inconspicuous power supply in white (AC100-240V ~ 50 / 60Hz DC12V 2A)
Scope of delivery
- Dörr light panel LT-2020 LED 16x16cm
- Inconspicuous power supply in white (AC100-240V ~ 50 / 60Hz DC12V 2A)
- protective sleeve
On this page we present recommended accessories which help you a lot at your work with the light panel.
For the cleaning of the glass surface of the light panel we recommend the scanner cleaning set from Kinetronics. The set consists of an anti static cloth, with which you can clean the complete glass surface, and an anti static brush for cleaning smaller parts, but also for cleaning film material. Both the cloth and the brush have the special feature that they remove static charges, which adduct dust magically.
|
If the glass surface of the light panel is covered with strong dust we recommend the use of the Kinetronics cleaning fluid PLCD. That's a high value cleaning fluid, which has been developed especially for the cleaning of optical glasses and glass surfaces. With a couple of drops you can effectively remove dust and dirt.
|
When working with films it often happens that you accidentally touch the emulsion side of the film. The damage often is irreparable. You can avoid damages to the film material and comfortably put films onto the light panel by wearing fine cotton gloves.
|
Anti-dust spray is used to clean the glass surface of the light panel by removing dust and fluffs with a flimsy current of air without touching the glass surface at all. There is no better, more comfortable and more efficient way to clean your light panel. Additionally anti dust spray is suitable to clean film material.
|
For working with single negatives or positives or film strips we highly recommend using tweezers with flat shovels, because otherwise you run the risk of touching and damaging the film. Additionally, with such tweezers you easily take out film strips from archive sheets or photo bags, and you can easily put them onto the light panel.
|
Dörr GmbH
Messerschmittstr. 1
89231 Neu-Ulm
Tel.: (0731) 9703769
e-mail. info@doerr.gmbh
Messerschmittstr. 1
89231 Neu-Ulm
Tel.: (0731) 9703769
e-mail. info@doerr.gmbh
